Connecting to the College Network (TRIN-WIFI and TRIN-GUEST)

Connecting as …

Fellows and Students | Staff | Visitors/Guests


Trinity network connections for Fellows and Students

Wired Trinity Connections

All Fellow’s and student’s rooms in College have access to a wireless point or computer network point (an ethernet socket) that can be used to connect to the internet via an ethernet cable. A wired connection will be more reliable and provide a better connection speed than a wireless connection. Some devices may require an Ethernet adapter in order to make use of the wired network.

Registering from the device you want to add to the network:

What you will need:

How to Connect:

  1. Find the Ethernet port in your room
  2. Plug the Ethernet cable into the ethernet port in your room
  3. Connect the other end of the cable to the ethernet port on your device directly or with an adapter if required (which must be purchased at your own cost)
  4. After a few seconds your device should prompt you to log into the network
  5. Click ‘Login to network’ to open the login page in your device’s preferred browser
  6. Select ‘Raven Login’ and provide your raven credentials when prompted
  7. Click Login
  8. Unplug the ethernet cable from your device, wait 10 seconds and reconnect the cable to the device
  9. You will now be connected to the wired network on this device

Wireless Trinity Network

Registering from the device you want to add to the network:

What you will need:

How to Connect:

On the device you wish to connect to the network:

  1. Open wireless network settings and select ‘TRIN-REGISTRATION’ from the list of available Select Wireless Networks
  2. Click ‘Login to this network’
  3. Click ‘Raven Login’ to login using your raven login
  4. When given the success confirmation page, return to your device’s wireless settings and select ‘TRIN-WIFI’ from the list of available Wireless Networks
  5. Enter the network password when prompted: NewtonsApple
  6. You are now connected on this device

Adding a device manually to the wired or wireless network, that cannot be added using the method(s) above:

What you will need:

For adding wired devices you will also need the following:

  • To have a device which can connect to networks using an ethernet cable (and adapter if applicable)
  • To have located the Ethernet port in your College room
  • To have an Ethernet cable which is under 5 meters long

How to Connect:

Use a device, which is already connected to a Trinity Network to:

  1. Browse to the Manual Device Management Site (https://devices.trin.private.cam.ac.uk
  2. Login using your Raven credentials
  3. Click ‘register a device’
    1. Enter a name for the device you wish to add to the network e.g. ‘myxbox’
    2. Enter the appropriate MAC address for the device you wish to add to the network in the format indicated ( eg 01:23:45:67:89:AB).
      1. For adding a Wireless device, you will need to use the wireless MAC address and for wired, the wired MAC address.
    3. Click ‘Save’
  4. Using the device you have just added to the manual registration site, select ‘TRIN-WIFI’ from the list of available Select Wireless Networks
  5. Enter the network password ‘NewtonsApple’
  6. You are now connected on this device
    1. If you were adding a wired device you will also need to:
      1. Find the ethernet port in your room
      2. Plug the Ethernet cable which was provided to you by the accommodation office on your arrival in your first year to the ethernet port in your room
  • Using the device you have just added to the manual registration, connect the other end of the ethernet cable to your device directly or with an adapter if required (which is purchased at your own cost)
  1. You are now connected on this device

eduroam

We also provide eduroam in the same places we provide TC-WLAN. Details for connecting to eduroam can be found on the UIS pages


Wireless networks at Trinity – Staff connection

What you will need:

How to connect your personal device to the College Wi-Fi:

On the device you wish to connect to the network:

  1. Open the wireless network settings
  2. Select ‘TRIN-REGISTRATION’ from the list of available wireless networks
  3. When prompted, click ‘Login to this network’
  4. Click ‘Staff Login’
  5. Use your Trinity Account login details to fill out the username and password fields
  6. Click ‘Log In’
  7. When given the success confirmation page, return to your device’s wireless settings
  8. Now select ‘TRIN-WIFI’ from the list of available Wireless Networks
  9. Enter the network password when prompted: NewtonsApple
  10. You are now connected on this device

Wireless networks at Trinity – Guest connection

What you will need:

How to connect your personal device to the College Wi-Fi:

On the device you wish to connect:

  1. Open wireless network settings
  2. Select ‘TRIN-GUEST’ from the list of available Wireless Networks
  3. When prompted, click ‘Login to this network
  4. Enter your usernam and password from your Network Authorisation Details in the two boxes and click ‘Submit’
  5. You are now connected on this device